MISSION 01 / SENSOR BRACKET
Touchscreen Experience
Can you build a mission-ready part?
Choose the material. Plan the process. Run the machine. Inspect the result. Your mission starts now.
MISSION COMPONENT / SENSOR BRACKET
Step 1 · Material
Choose your material
The bracket must be light, strong, and practical to machine.
Step 2 · Process
What comes first?
Choose the best first operation after the raw material arrives.
Step 3 · Machining
Make the part
A CNC program guides the cutting tool with speed and precision.
LIVE CUTTING
SPINDLE SPEED0 RPM
TOOL½″ CARBIDE END MILL
PROGRAMREADY
Step 4 · Quality
Does the part pass?
Compare the CMM measurement with the print, then make your decision.
ENGINEERING DRAWING / HOLE DIAMETER⌀ 1.0000 ± 0.0020 inAllowed range: 0.9980″ to 1.0020″
TR MANUFACTURING
TRAINING SIMULATIONMeasurement Report
Fictional measurements
Swipe the table to see all measurements →
| Feature | Nominal | Upper tol. | Lower tol. | Actual | Deviation |
|---|---|---|---|---|---|
| Hole diameter | 1.0000 | +0.0020 | −0.0020 | 1.0015 | +0.0015 |
Nominal = target size · Actual = measured size · Deviation = actual minus nominal
Does this hole diameter meet the print?
1.0015″
0.9980″Lower limit1.0000″Nominal1.0020″Upper limit
Part delivered
You built it.
That’s high-mix, low-volume manufacturing: solve the problem, make it accurately, and prove it meets the print.
QUALITY +25PLANNING +25PRECISION +25MISSION +25
You just tried the work of a machinist, programmer, and quality inspector.